ITK-38 Printer
ITK38 Thermal Printer - Paper Won't Retract
Normal operation involves the printed paper being retraced if it is not grabbed within 15 seconds. If this does not occur, use the below fixes. Option 1 should work most of the time. If option 1 does not work continue to Option 2. When you are ...
ITK-38 Printer Jam” Error Solutions
The cause of the “Printer Jam” error could be caused by a number of things. The following contains instructions to 1.) Check and clear the jam, 2.) Reset the printer, 3.) Clean the sensors. Checking and Clearing a Document Jam: Illustration 1.1 ...
Model ITK-38 Printer - Paper Loading-Vertical Position
1 - Paper Loading Apply power to the printer by turning on its rear mounted power switch. The printer will complete its initialization process and then beep indicating that it is ready to have paper loaded. For autoloading, the printhead pressure ...
Model ITK-38 Printer Paper Loading-Horizontal Position
1. – Paper Loading Apply power to the printer by turning on its rear mounted power switch. The printer will complete its initialization process and the beep indicating that it is ready to have paper loaded. For auto-loading, the printhead (see ...
How To Make Print Darker or Lighter by Changing The Print Intensity On ITK-38
Step-by-step instructions to change the Print Intensity for ITK-38 Printer Click the Esc key Password is dynamo Click Shutdown Click Logout Login to TIPSadmin Password is Adm4!Kiosk (!=Bang) Open Control Panel Click Hardware and Sound Select Devices ...